FOXF1 reverses lung fibroblasts transdifferentiation via inhibiting TGF-ß/SMAD2/3 pathway in silica-induced pulmonary fibrosis.

Silicosis is one of the most common and severe types of pneumoconiosis and is characterized by lung dysfunction, persistent lung inflammation, pulmonary nodule formation, and irreversible pulmonary fibrosis. The transdifferentiation of fibroblasts into myofibroblasts is one of the main reasons for the exacerbation of silicosis. However, the underlying mechanism of transcription factors regulating silicosis fibrosis has not been clarified. The aim of this study was to investigate the potential mechanism of transcription factor FOXF1 in fibroblast transdifferentiation in silica-induced pulmonary fibrosis. Therefore, a silicosis mouse model was established, and we found that FOXF1 expression level was significantly down-regulated in the silicosis group, and after overexpression of FOXF1 by adeno-associated virus (AAV), FOXF1 expression level was up-regulated, and silicosis fibrosis was alleviated. In order to further explore the specific regulatory mechanism of FOXF1 in silicosis, we established a fibroblasts transdifferentiation model induced by TGF-ß in vitro. In the model, the expression levels of SMAD2/3 and P-SMAD2/3 were up-regulated, but the expression levels of SMAD2/3 and P-SMAD2/3 were down-regulated, inhibiting transdifferentiation and accumulation of extracellular matrix after the overexpressed FOXF1 plasmid was constructed. However, after silencing FOXF1, the expression levels of SMAD2/3 and P-SMAD2/3 were further up-regulated, aggravating transdifferentiation and accumulation of extracellular matrix. These results indicate that the activation of FOXF1 in fibroblasts can slow down the progression of silicosis fibrosis by inhibiting TGF-ß/SMAD2/3 classical pathway, which provides a new idea for further exploration of silicosis treatment.

Lumbar and neck injuries of occupants in different reclining postures.

PURPOSE: With the increasing level of automation in automobiles, the advent of autonomous vehicles has reduced the tendency of drivers and passengers to focus on the task of driving. The increasing automation in automobiles reduced the drivers' and passengers' focus on driving, which allowed occupants to choose a more relaxed and comfortable sitting position. Meanwhile, the occupant's sitting position went from a frontal, upright position to a more relaxed and reclined one, which resulted in the existing restraint systems can not to keep occupants safe and secure. This study aimed to determine the effects of different reclining states on occupants' lumbar and neck injuries. METHODS: This is an original research on the field of automotive safety engineering. Occupants in different initial seating positions (25°, 35°, 45°, and 55°) were adapted to changes in seat back angle and restraint systems and placed in the same frontal impact environment. Neck injury indexes, lumbar axial compression force and acceleration, as well as occupant dynamic response during the impact, were compared in different seating positions. The injury response and kinematic characteristics of occupants in different reclining positions were analyzed by the control variable method. RESULTS: As the sitting angle increased, the occupant's head acceleration decreased, and the forward-lean angle decreased. Occupants in the standard sitting position had the greatest neck injury, with an Nij of 0.95, and were susceptible to abbreviated injury scale 2+ cervical medullary injuries. As the seatback angle increased, the geometric position of the lumbar spine tended to be horizontal, and the impact load transmitted greater forces to the lumbar spine. The occupant's lumbar injury was greatest in the lying position, with a peak axial compression force on the lumbar region of 5.5 KN, which was 2.3 KN greater than in the standard sitting position. CONCLUSION: The study of occupant lumbar and neck injuries based on different recline states can provide a theoretical basis for optimizing lumbar evaluation indexes, which is conducive to the understanding of the lumbar injury mechanism and the comprehensive consideration of occupant safety protection.

Stabilizing Copper by a Reconstruction-Resistant Atomic Cu-O-Si Interface for Electrochemical CO2 Reduction.

Copper (Cu), a promising catalyst for electrochemical CO2 reduction (CO2R) to multi-electron reduction products, suffers from an unavoidable and uncontrollable reconstruction process during the reaction, which not only may lead to catalyst deactivation but also brings great challenges to the exploration of the structure-performance relationship. Herein, we present an efficient strategy for stabilizing Cu with silica and synthesize reconstruction-resistant CuSiOx amorphous nanotube catalysts with abundant atomic Cu-O-Si interfacial sites. The strong interfacial interaction between Cu and silica makes the Cu-O-Si interfacial sites ultrastable in the CO2R reaction without any apparent reconstruction, thus exhibiting high CO2-to-CH4 selectivity (72.5%) and stability (FECH4 remains above 60% after 12 h of test). A remarkable CO2-to-CH4 conversion rate of 0.22 µmol cm-2 s-1 was also achieved in a flow cell device. This work provides a very promising route for the design of highly active and stable Cu-based CO2R catalysts.

Modulating the Asymmetric Atomic Interface of Copper Single Atoms for Efficient CO2 Electroreduction.

Cu single-atom catalysts (Cu SACs) have been considered as promising catalysts for efficient electrocatalytic CO2 reduction reactions (ECRRs). However, the reports on Cu SACs with an asymmetric atomic interface to obtain CO are few. Herein, we rationally designed two Cu SACs with different asymmetric atomic interfaces to explore their catalytic performance. The catalyst of CuN3O/C delivers high ECRR selectivity with an FECO value of above 90% in a wide potential window from -0.5 to -0.9 V vs RHE (in particular, 96% at -0.8 V), while CuCO3/C delivers poor selectivity for CO production with a maximum FECO value of only 20.0% at -0.5 V vs RHE. Besides, CuN3O/C exhibited a large turnover frequency (TOF) up to 2782.6 h-1 at -0.9 V vs RHE, which is much better than the maximum 4.8 h-1 of CuCO3/C. Density functional theory (DFT) results demonstrate that the CuN3O site needs a lower Gibbs free energy than CuCO3 in the rate-determining step of CO desorption, leading to the outstanding performance of CuN3O/C on the process of ECRR-to-CO. This work provides an efficient strategy to improve the selectivity and activity of the ECRR via regulating asymmetric atomic interfaces of SACs by adjusting the coordination atoms.

Distinct Crystal-Facet-Dependent Behaviors for Single-Atom Palladium-On-Ceria Catalysts: Enhanced Stabilization and Catalytic Properties.

High-performance, fully atomically dispersed single-atom catalysts (SACs) are promising candidates for next-generation industrial catalysts. However, it remains a great challenge to avoid the aggregation of isolated atoms into nanoparticles during the preparation and application of SACs. Here, the evolution of Pd species is investigated on different crystal facets of CeO2 , and vastly different behaviors on the single-atomic dispersion of surface Pd atoms are surprisingly discovered. In situ X-ray photoelectron spectroscopy (XPS), in situ near-ambient-pressure-XPS (NAP-XPS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray absorption spectroscopy (XAS) reveal that, in a reducing atmosphere, more oxygen vacancies are generated on the (100) facet of CeO2 , and Pd atoms can be trapped and thus feature atomic dispersion; by contrast, on the CeO2 (111) facet, Pd atoms will readily aggregate into clusters (Pdn ). Furthermore, Pd1 /CeO2 (100) gives a high selectivity of 90.3% for the catalytic N-alkylation reaction, which is 2.8 times higher than that for Pdn /CeO2 (111). This direct evidence demonstrates the crucial role of crystal-facet effects in the preparation of metal-atom-on-metal-oxide SACs. This work thus opens an avenue for the rational design and targeted synthesis of ultrastable and sinter-resistant SACs.

Cobalt Single Atom Incorporated in Ruthenium Oxide Sphere: A Robust Bifunctional Electrocatalyst for HER and OER.

The development of highly active and stable bifunctional noble-metal-based electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) is a crucial goal for clean and renewable energy, which still remains challenging. Herein, we report an efficient and stable catalyst comprising a Co single atom incorporated in an RuO2 sphere for HER and OER, in which the Co single atom in the RuO2 sphere was confirmed by XAS, AC-STEM, and DFT. This tailoring strategy uses a Co single atom to modify the electronic structures of the surrounding Ru atoms and thereby remarkably elevates the electrocatalytic activities. The catalyst requires ultralow overpotentials, 45 mV for HER and 200 mV for OER, to deliver a current density of 10 mA cm-2 . The theoretical calculations reveal that the energy barriers for HER and OER are lowered after incorporation of a cobalt single atom.

Synergistically Interactive Pyridinic-N-MoP Sites: Identified Active Centers for Enhanced Hydrogen Evolution in Alkaline Solution.

For electrocatalysts for the hydrogen evolution reaction (HER), encapsulating transition metal phosphides (TMPs) into nitrogen-doped carbon materials has been known as an effective strategy to elevate the activity and stability. Yet still, it remains unclear how the TMPs work synergistically with the N-doped support, and which N configuration (pyridinic N, pyrrolic N, or graphitic N) contributes predominantly to the synergy. Here we present a HER electrocatalyst (denoted as MoP@NCHSs) comprising MoP nanoparticles encapsulated in N-doped carbon hollow spheres, which displays excellent activity and stability for HER in alkaline media. Results of experimental investigations and theoretical calculations indicate that the synergy between MoP and the pyridinic N can most effectively promote the HER in alkaline media.

Topological self-template directed synthesis of multi-shelled intermetallic Ni3Ga hollow microspheres for the selective hydrogenation of alkyne.

Multi-shelled hollow structured materials featuring large void volumes and high specific surface areas are very promising for a variety of applications. However, controllable synthesis of multi-shelled hollow structured intermetallic compounds remains a formidable challenge due to the high annealing temperature commonly required for the formation of intermetallic phases. Here, a topological self-template strategy was developed to solve this problem. Using this strategy, we prepared well-defined multi-shelled intermetallic Ni3Ga hollow microspheres (Ni3Ga-MIHMs) as disclosed by the HAADF-STEM, HRTEM, and EDS characterizations, and the BET specific surface areas of them measured as much as 153.4 m2 g-1. XRD and EXAFS spectral characterizations revealed the atomically ordered intermetallic phase nature of the Ni3Ga-MIHMs. The selective hydrogenation of acetylene catalytic evaluation results further demonstrated excellent catalytic properties of the Ni3Ga-MIHMs, which results from the more energetically facile reaction pathway for acetylene hydrogenation and ethylene desorption over it as revealed by DFT calculations. Besides, this strategy is also extendable to synthesize other multi-shelled intermetallic Ni3Sn4 hollow microspheres, and is expected to open up new opportunities for rational design and preparation of novel structured and highly efficient intermetallics.